Karbon square 4-spot ceiling light, aluminum, GU10

Measurements to check before choosing the location:

• Square base plate: 25 x 25 cm
• Total height: 16.5 cm below the ceiling
• Plate thickness: 2 cm
• Spotlights: 10 cm long, 6.5 cm in diameter
• Four adjustable spotlights, one toward each corner of the plate

Electrical information for choosing bulbs and preparing for installation:

• Socket: GU10, four light points
• Power: 10 W maximum per light point, LED
• Bulbs not included
• Power supply: 230 V, 50 Hz
• Protection rating: IP20, for dry rooms
• Protection class: I, earthing required
• Material: lacquered aluminum, matte finish
• Adjustable spotlights: each tilts on its joint
• Manufacturer's warranty: 5 years

Four fluted spotlights arranged in a square are enough to create a pattern on the ceiling: the finish determines whether they blend into the surface or become the focal point of the room. Their texture echoes the slatted walls and fluted furniture, and the same design can be found on the wall lights, pendants, and lamps in the Karbon line. Whether in the living room, a bedroom, or a kitchen, the ceiling light illuminates several zones from a single point, without the need for a rail.

Installation, step by step according to the assembly diagram, then maintenance:

• Switch off the power at the fuse box before any work
• Drill the ceiling, insert the two wall plugs and screw in the mounting bracket
• Connect the phase and neutral wires to the terminal block, then the ground wire to its terminal
• Place the base plate onto the bracket and secure it with the central nut
• Install the four GU10 bulbs, adjust the spotlights and restore power
• Connection should be entrusted to an electrician in case of doubt
• Maintenance: soft, dry cloth, without abrasive products or solvents
• Indoor use, in a dry room