Liro Cluster Pendant with 3 White Perforated Steel Shades, GU10

The total height matters more here than anywhere else: the tubes descend at the end of their cables, far below the ceiling rose.

• Total height: 125 cm maximum, cables adjustable during installation
• Spread: 25 x 25 cm
• Ceiling rose: 25 cm in diameter, 3 cm thick
• Tubes: 6 cm in diameter, 30 cm high, at staggered heights
• Installation guide: 70 to 80 cm between the tabletop and the bottom of the pendant light
• Number of light points: 3
• Weight: 1.8 kg
• Package: 35.5 x 25 x 14.5 cm, 2.2 kg

Useful data for choosing bulbs and preparing the connection:

• Socket: GU10, 3 light points
• Maximum power: 10 W LED per bulb
• Bulbs not included
• Light: directed downwards and filtered on the sides by the cutout
• Power supply: 230 V, 50 Hz
• Protection rating: IP20, for dry rooms
• Protection class: I, earth connection
• Material: matte white lacquered steel
• Cables: transparent
• Manufacturer's warranty: 5 years

Three white tubes at staggered heights and a mesh of ovals cut into their lower section: the Liro 3 remains minimalist, with a detail that catches the light. By day, it blends into a light-colored ceiling; by night, its cutouts light up. It complements moldings, parquet flooring, and bouclé seating, whether above a coffee table, a round table, or an island.

Assembly diagram steps, power switched off at the breaker panel:

• Preferably call an electrician, and switch off the power before starting
• Drill the ceiling and secure the bracket with the two screws and wall plugs
• Connect the live and neutral wires to the terminal block, then the ground wire (class I)
• Adjust the length of each cable to the desired height
• Secure the ceiling canopy to the bracket using its central screw
• Install three GU10 LED bulbs of 10 W maximum, reassemble the tubes, then restore the power
• Indoor use, in a dry room (IP20)
• Maintenance: soft, dry cloth, without abrasive products